THE CHALLENGER FRAMe MACHINE
ONLY THE FINEST
The Chisum Challenger is the world’s #1 drive-on frame machine with a precision-milled deck. After fabrication, each Challenger mainframe spends 48 hours running through a computer-controlled milling machine. This process eliminates any distortion in the steel and ensures that the entire mainframe is 100% true, both end-toned and side-to-side, including all cross members.
The Chisum Challenger is guaranteed to be accurate and delivers the flattest surface in the industry from which to measure. Plus, it has a phenomenal finished appearance that captivates all who see it. No need to pinch yourself! Simply adjust this perfect pulling surface to a comfortable working height, and you’re ready to produce more accurate repairs than ever before.
KEY FEATURES
Telescoping Tower Heads
10-Ton TowersFamous 10 Ton Round Towers
Pulling PowerEnormous 9.2 Tons of Pulling Power
roller bearingsEight industrial-strength roller bearings provide near-effortless tower movement
working heightFully adjustable working height - 12" to 41.5"
deckA perfectly smooth, precision-milled deck provides the flattest surface in the industry
removable cross members
Front and rear removable cross members provide easy access to the vehicle
tiedown pockets228 steel-reinforced tie-down pockets provide unlimited holding optionss is Tootlip
adjustable tower positionTowers can be secured 360 degrees, every inch
pin storageConvenient storage location for each tower pin and tower bolt
collarsAdjustable collar for easy positioning
Gagues
Custom Designed, easy-to-read, liquid-filled gauges.
jack beamSliding, removable jack beam
CHALLENGER SPECIFICATIONS
-
Length
20’ Treadways
5’ 2” Loading Ramps
24’ 2” with tower positioned front and rear -
Width
7’ 4” Total bed width
11’ 6” with a tower on either side
26.25” Treadway width
35.5" Width between treadway -
Workiing Height
12” with lift fully lowered
41.5” with lift fully raised -
Machine Height
9’ 1.5” with lift fully raised and tower heads fully lowered
9’ 11.5” with lift fully raised and tower heads fully extended
-
Weight
8,470 lbs. with three towers
-
Hydraulic Power
9.2 tons at the hook
-
Lift Capacity
10,000 lbs.
-
Tie Downs
228
-
Grease Fittings
13 on hydraulic lift and towers
removable cross-members
The Challenger's front and rear cross-members allow better damage access for technicians and estimators.
towers can be ganged
The Challenger's towers can be ganged close together. This allows technicians to repair damage quicker and easier.
handheld remote control
Control the Challenger with the push of a button. The hand held remote even controls accessories like the rolling scissor lift (shown here), which makes working on SUV's and trucks easy.
INTERNAL PLUMBING
The Challenger's hydraulic plumbing is internal to the frame. This means no hoses on the floor. Cleaner. Safer. Better.
LIQUID FILLED PRESSURE GAUGES
Excellent for monitoring hydraulic pressure on each tower. These high-quality gauges give technicians instant visual feedback that quantifies the amount of stress relieved from damaged areas.
ADVANCED CLAMPING SYSTEM
Improved anchoring is compatible with many specialty adapters. Strong enough to be used with truck anchoring. Features adjustable pinch weld clamping for being able to secure damaged rocker panels on side hits. All hardware is accessible from the top.
HIGH OUTPUT INDUSTRIAL LIGHTS
These powerful 2600 lumen LED lights to enable technicians to find measuring locations and hidden damage. They are hard-wired internally, eliminating the need for extension cords. Yet another innovation making collision repair easier.
PORTABLE STEEL PUMP CART
This workhorse protects the industrial-strength electric/hydraulic pump and motor. Two liquid-filled gauges monitor pressure on the hydraulic lift and all of the towers.
AUXILIARY PULLING POWER
Power on the move. This allows technicians additional pulling power anywhere on and around the entire vehicle. This can also be used for high pulls, down pulls, and pushing.