Chisum Bronco
Chisum Bronco Frame Machine
Full pulling power that barely touches your floor space. The deck sits just 5-1/4 inches off the ground, so the car drives on and drives off. No ramps, no lift.
Because it is that low and that flat, your techs use it every day and not only on pull days. Write an estimate on it, run a teardown, handle supplement or suspension work, then anchor down and put 10 tons on a hard hit. Light hit to severe frame damage on a full-size pickup, all in the same bay.
- 5-1/4"Deck height
- 14 ftOverall length
- 82"Overall width
- 10 tonPulling force
- 8,800 lbLift capacity
- 66"Max lift height
Frame Machine Key Features
- Lightweight, removable tread-waysLift them off by hand for underbody access
- 360 degree pulling capabilitiesReach any corner without repositioning the vehicle
- Electric hydraulics with hand held remoteRaise, lower and pull from where you can see the damage
- Slotted deck for chain tie downsHook up and pull without a long setup
- 4 point anchoringHolds the body solid through a hard pull
- Drive on, drive off at 5-1/4"Usable every day, not only on pull days
The new Chisum Bronco stands alone; nobody beats Chisum... nobody!
BRONCO SPECIFICATIONS
Measurements
- Length: 14 ft total length
- Width: 82" total width
- Adjustable Height: From 5" to 66"
Weights & Capacities
- Weight: 4000 lbs
- Hydraulic Power: 10 tons
- Lift Capacity: 8,800 lbs
Additional Specs
- Tie Downs: Slotted Deck
- Grease Fittings: 10
- 4 Point Anchoring
Only the Best—Efficiency Without Compromise
Stop wasting time crawling under vehicles. With the Chisum’s drive-on, drive-off design, techs can position vehicles effortlessly—no kneeling, no rubber pad setups. Simply park, grab the handheld remote, and lift to your ideal working height. Whether you’re tearing down, pulling, or writing estimates, the Chisum Bronco delivers unmatched ease, precision, and legendary build quality.
The Chisum Bronco – Built for Speed, Power & Profit
When every minute counts, the Chisum Bronco delivers. Designed to boost efficiency and eliminate costly rework, this powerhouse gives your shop the edge with faster cycle times and higher repair accuracy. With 10 tons of pulling force and dual hydraulic lift rams, you’ll handle anything from quick estimates to full structural repairs—on unibody or full-frame vehicles.
More throughput. Fewer delays. Happier customers.
With 10 tons of pulling power and dual hydraulic lift rams, this machine ensures that you have the strength and flexibility to work with vehicles of all shapes and sizes.
Is the Chisum Bronco Right for Your Shop?
If you’re asking yourself:
- "Will this machine help me get repairs done faster?"
- "Can I trust the Bronco to handle the modern vehicles we work on?"
- "Is this the right tool for my shop’s unique needs?"
From small body shops to high-volume repair centers, the Chisum Bronco delivers 10 tons of pulling power in a compact, efficient design—helping you work faster, boost accuracy, and keep customers happy.
